Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00

From: Andrew Bender (abender@tns-inc.com)
Date: Sun Feb 06 2000 - 20:26:01 EST


Ethernet 0 will see continuous collisions, and Ethernet 1 will not
sense link. Instead, perhaps OSPF ECMP will do, if the situation
permits...

Andrew Bender
tns-inc.com

Jesper Skriver wrote:
> Or create a custom cable, that on the end to the switch is a ordinary
> cable, but takes RX and TX pair into 2 different connectors, that goes
> to 2 different ports on your 4000, say Ethernet0 is the recieve, and
> Ethernet1 is the transmit
> :
> :
> :
> Note, I havn't tried this, but I cannot see why it shouldn't work.
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT