[nsp] load-balancing and NAT

From: Brian Wallingford (brian@meganet.net)
Date: Fri Feb 11 2000 - 12:14:02 EST

Next message: A Routerman: "[nsp] traceroute filtering"
Previous message: David Greer (GNC): "SYSLOG and SNMP Trap Manager"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

We have a customer who is interested in adding a second T1 through a
different Telco for load-balancing and redundancy. This customer is using
a combination of routable addresses and NAT. I'm considering implementing
this using CEF per-packet load balancing, and using something like: "ip
nat inside source list 1 interface lo0 overload", where two paths to lo0
are known by our edge router. Should this work?

tia,
brian

Next message: A Routerman: "[nsp] traceroute filtering"
Previous message: David Greer (GNC): "SYSLOG and SNMP Trap Manager"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:10 EDT