Does anyone know how to associate MAC-addresses and VC-numbers on a RFC 1483
bridging environment ?
'show bridge' returns only the interface (ATM x/y/z.w) to which packets are
forwarded, not the VCD or VCIs where packets to that MAC will go.
If that matters, hardware is Cisco 6400, IOS is 12.0(5); I think this would
be very similar to 7xxx routers as each 6400 NRP is a 7200-on-a-board.
Rubens Kuhl Jr.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:10 EDT