It is importnt that your traffic be non-real time for this to work. If your
buffers are deep enough, you can handle bursts, but the buffer latency, if
driven too high, will cause TCP SRTT increases that will make window growth
unlikely or at a minimum, uselessly slow.
chris
-----Original Message-----
From: Tatsuya Kawasaki [mailto:tatsuya@kivex.com]
Sent: Friday, June 16, 2000 4:36 PM
To: cisco-nsp@iagnet.net
Subject: simple questions
when I type sh atm int atm 5/0/0.1,
I see that Link oversubscribed by 70000 kbps ..
Does it means that we are doomed???
>sh atm interface atm 5/0/0.1
Interface ATM5/0/0:
AAL enabled: AAL5 , Maximum VCs: 4096, Current VCCs: 7
Maximum Transmit Channels: 0
Max. Datagram Size: 4528
PLIM Type: DS3 - 45Mbps, Framing is C-bit PLCP,
DS3 lbo: short, TX clocking: LINE
Cell-payload scrambling: ON
60756681 input, 6704945 output, 128 IN fast, 36067219 OUT fast, 0 out
dropVBR-NRT : 115000
Link oversubscribed by 70000 kbps
Config. is ACTIVE
TIA,
Tatsuya
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Tatsuya Kawasaki
Allegiance Telecom
Unlock the Power of the Internet
http://www.kivex.com
Phone 301.215.6777 Fax 301.215.5991
Affiliation given for identification not representation
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:13 EDT