Re: [nsp] BGP advertisement

From: Martin Cooper (mjc@cooper.org.uk)
Date: Tue Jun 27 2000 - 10:24:51 EDT


"Loureiro, Rodrigo" <rodrigo.loureiro@netstream.com.br> writes:

> I'm receiving a IBGP advertisement on my core router, but it's
> not advertising the route to its EBGP peers, as were expected.
> I checked the route with sh ip route it was OK. Then i checked
> with sh ip bgp and the router returned that it was the best one,
> but "Not advertised to any peer".
>
> Finally, I checked my output filter-list and the AS number
> corresponding to the the advertisement was OK, i mean, it
> should be matching and then advertising the route. I cleared
> the EBGP peer but it didn't solve the problem. The only thing
> i didn't do was to turn-off the output filter-list, because
> it would be critical if we consider the number of routes that
> will be advertised.
>
> Has anyone dealed with a common situation before? Any
> suggestions?

router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#router bgp <your_as>
router(config-r)#no synchronization
router(config-r)#^Z

M



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:13 EDT