Not that I know of, it's fairly basic to BGP that it's supposed to
evaluate all the routes an pass on *only* the best...
There's also no defined way to say "here's a route, but don't use it",
at least one which would still get it into your routing table for
query purposes.
George
> Date: Thu, 03 Aug 2000 09:50:40 +0200
> From: Thomas Kernen <tkernen@deckpoint.ch>
> X-Accept-Language: en,ja
> To: cisco-nsp <cisco-nsp@puck.nether.net>
> Subject: [nsp] BGP route-views setup
>
>
> I've got a BGP route-views router running 5 BGP sessions from around our
> network. All is ok except the fact that I only have the best route for
> each session and I would like to get all the routes for a network entry
> (ie: peering points with 10 differents routes for same network entry).
>
> Is there a command in the BGP config that allows me to specify that I
> want to send to a neighbor all the routes?
>
> Thomas
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT