[nsp] Cat 2948G-L3 code?

From: Adam Rothschild (asr@latency.net)
Date: Tue Aug 08 2000 - 23:22:50 EDT

Next message: George Robbins: "Re: [nsp] dual-homed issue"
Previous message: Philip Smith: "Re: [nsp] dual-homed issue"
Next in thread: Asbjorn Hojmark: "RE: [nsp] Cat 2948G-L3 code?"
Reply: Asbjorn Hojmark: "RE: [nsp] Cat 2948G-L3 code?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

Please excuse the potentially ignorant question, but what are the hardware
differences (if any) between the L3 and non-L3 versions of the
Cat2948G?

More to the point, will the Catalyst 2948G-L3 run Cat4k/2948G CatOS
code? Likewise, will the 2948G (non-L3) run 2948G-L3 IOS? I've heard
conflicting information from Cisco folks, and I haven't had the
chance to experiment, so any information would be greatly appreciated.

Thanks in advance!

-adam

Next message: George Robbins: "Re: [nsp] dual-homed issue"
Previous message: Philip Smith: "Re: [nsp] dual-homed issue"
Next in thread: Asbjorn Hojmark: "RE: [nsp] Cat 2948G-L3 code?"
Reply: Asbjorn Hojmark: "RE: [nsp] Cat 2948G-L3 code?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT