[nsp] OC3 POS interface.

From: shiva (shiva@iasiaworks.com)
Date: Wed Aug 02 2000 - 13:52:20 EDT

Next message: Basil Dolmatov: "[nsp] UPS iwth DC input"
Previous message: Zaheer Aziz: "Re: [nsp] Ethernet backup interface"
Next in thread: Neil J. McRae: "Re: [nsp] OC3 POS interface."
Reply: Neil J. McRae: "Re: [nsp] OC3 POS interface."
Maybe reply: Mark Borchers: "RE: [nsp] OC3 POS interface."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi List,

I have an OC3 hooked up to a 7206VXR on either end, both the ends are free of any alarms(they even show up/up on both ends). But the interface keeps resetting itself periodically with resultant line protocol going up and down. HDLC is the default encap, framing is sonet, and have tried all timing combinations. I am troubleshooting this end-to-end with the carrier. Meanwhile any ideas/suggestions on this?

Thanks in advance.
shiva balasubramanian
senior network engineer
iasiaworks

Next message: Basil Dolmatov: "[nsp] UPS iwth DC input"
Previous message: Zaheer Aziz: "Re: [nsp] Ethernet backup interface"
Next in thread: Neil J. McRae: "Re: [nsp] OC3 POS interface."
Reply: Neil J. McRae: "Re: [nsp] OC3 POS interface."
Maybe reply: Mark Borchers: "RE: [nsp] OC3 POS interface."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:15 EDT