> I would like to protect a network connected to a router via a 2924XL switch.
> Problem: I would like to apply the access-list on the switch and not on
> the router (to avoid a high load).
>
> I defined an access-list and applied to the default VLAN (1). It does not
> work! Is there a problem? Can I apply acl in a VLAN?
The 2924XL is not a router. You can't use it to protect your network with
IP access lists.
Steinar Haug, Nethelp consulting, sthaug@nethelp.no
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:15 EDT