You might also want to check out 'service tcp-keepalives-in'
-----Original Message-----
From: Craig Anderson [mailto:craig@xtime.com]
Sent: Tuesday, August 29, 2000 8:02 AM
To: Mark Borchers
Cc: cisco-nsp@puck.nether.net
Subject: Re: [nsp] Locked vty lines
On Tue, 29 Aug 2000, Mark Borchers wrote:
> I'm interested in learning what circumstances are known
> to make a single vty session cause the idle lines to
> lock up.
>
> I've recently had a situation where a hanging vty connection
> resulted in the router not to respond to telnet connection attempts.
>
> All other services were unaffected, and access was still available
> on the con and aux ports.
<--( SNIP )-->
Helu,
Do you have an 'exec-timeout' set? I've found that the exec-timeout
will remedy this most of the time... i.e. 'exec-timeout 1 0' ( pretty
reasonable ).
-- Craig
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:16 EDT