Hi
If I have a point-to-point frame-relay on a 512k line. Divide that line up
into 4 pipes of 128k each by using "map-class frame-relay" and setting the
cir value = 128000. I also set the 'bc' value to 256000 for 2 of the pipes
and 128000 for the other 2.
Do I need to put the mincir command in. What effect would it have (if any).
Do I need to put in the 'be' value. What effect will it have.
How does the router decide which pipe it will allow to burst.
Regards
Christiaan Ehlers
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:16 EDT