Hi all,
Think about the following environment:
Ethernet ________ ________
| | |
| |
| _________| Catalyst| _______________ | 7513 |
| | 6500 | ATM |
|
| |_______ |
|_______|
|
192.168.0.5/24
192.168.0.0/24
I donīt know if it is possible but here it goes the challenge: i would like
to bridge an atm connection to an ethernet network, in such a way that the
ip network should be seen as a single network.
I was thinking about use transparent bridging, defining a bridge-group and
using on both sides of Catalyst (ethernet and atm), but iīm not sure it will
work, because the address resolution on the atm side works in a different
way.
Does anyone ever done or know a functional way to implement this
connectivity?
Regards,
--Rodrigo Loureiro Systems Engineer - AT&T LA
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT