Hi All,
Thanks a lot for the advice I have recieved so far. I am a little confused
on how service providers allocate asymetric PVC's. Assuming I plan to
offer the same to customers, How would I be doing the PVC provisioning in
terms of CIR allocation, ie assume I have a central site called "A", & I
have two remote sites called "B" & "C". Now lets assume site "A" needs two
point - point PVC's to the remote sites, Let's say Site A connects using
PVC 1 to Site B, & PVC 2 to Site C. Now how would assymetry be
provisioned. Would I be able to provision PVC 1 with CIR of 128 Kbps as
incoming bandwidth & CIR of 64 Kbps for outgoing, ie (Directional
bandwidth) on each individual local PVC. Or is it only possible to say
that each end of the PVC would have different CIR'S, Becos the latter
would not make much of sense. Kindly correct me.
Kindly advice
With warm regards,
Joseph.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT