>
> Cisco Internetwork Operating System Software
> IOS (tm) 5800 Software (C5800-P4-M), Version 11.3(8.1)AA,
>
> Firmware Rev: 2.5.1.0
>
unwritten law: allways use the newest possible IOS. Of course you get
all these new bugs (proprietary features), but now they are supported
.....
Rgds.
Andre
>
>
> ----- Original Message -----
> From: "Chris Parker" <cparker@starnetusa.net>
> To: <cisco-nsp@puck.nether.net>
> Sent: Tuesday, September 19, 2000 12:29 PM
> Subject: Re: [nsp] Cisco 5800's & SNMP
>
>
> > At 02:51 PM 9/19/00 -0400, phorce wrote:
> > >
> > >
> > >What I'm trying to do is get modem connect rates via SNMP
> for use on the
> > >
> > >new RADIUS servers. The following OIDs seem to be the ones I want:
> > >
> > >readonly int cmTXRate
> >
> > The OIDs you mention, namely:
> >
> > cmTXRate and cmRXRate ( from the CISCO-MODEM-MGMT-MIB )
> >
> > work just fine on all the 5800's I have deployed.
> >
> > cmProductDescription returns a different value for my queries.
> >
> > A query for the OID's you mention returns:
> >
> > cmProductDetails.102.0 = Modem (Select Option), Firmware
> Rev: 50.55.50.48
> > cmTXRate.102.0 = 46666
> > cmRXRate.102.0 = 26400
> >
> > IOS version on these 5800s is 12.1(2a)AA, Firmware revision 2.7.2.0
> >
> > You neglect to mention what IOS version you are running and
> what modem
> > firmware is installed. Care to share that info?
> >
> > -Chris
> >
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT