Re: PA-2FEISL/load issue?

From: Ray Davis (ray@carpe.net)
Date: Thu Sep 21 2000 - 14:43:34 EDT


Just happened to see this last night:

    Replacement Recommendation for the 2-Port Fast Ethernet ISL (PA-2FEISL)
    http://www.cisco.com/warp/customer/770/fn8791_11301999.shtml

Cheers,
Ray

> Check out this performance study on CCO
>
> http://www.cisco.com/warp/public/cc/pd/ifaa/pa/fsetpa/prodlit/feip5_ds.htm
>
> Also,
>
> http://www.cisco.com/warp/public/cc/pd/ifaa/pa/fsetpa/prodlit/pa2fe_ds.htm
>
> has a note:
>
> > NOTE: The two-port Fast Ethernet/ISL port adapters have been designed to provide inter-VLAN bridging and routing for Token Ring users. Native Fast Ethernet users are
> > PA-FE-TX or PA-FE-FX adapters for higher performance.
> >
>
> Joe
>
> Larry Rosenman wrote:
>
> > A vendor of mine mentioned in passing that the PA-2FEISL-TX PA has an
> > issue with being driven above 60%. Has anyone got a reference on this
> > issue or some real-world experience?
> >
> > Thanks!
> >
> > LER
> >
> > --
> > Larry Rosenman http://www.lerctr.org/~ler
> > Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org
> > US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749
>
> <!doctype html public "-//w3c//dtd html 4.0 transitional//en">
> <html>
> Check out this performance study on CCO
> <p><A HREF="http://www.cisco.com/warp/public/cc/pd/ifaa/pa/fsetpa/prodlit/feip5_ds.htm">http://www.cisco.com/warp/public/cc/pd/ifaa/pa/fsetpa/prodlit/feip5_ds.htm>
> <p>Also,
> <p><A HREF="
http://www.cisco.com/warp/public/cc/pd/ifaa/pa/fsetpa/prodlit/pa2fe_ds.htm">http://www.cisco.com/warp/public/cc/pd/ifaa/pa/fsetpa/prodlit/pa2fe_ds.htm>
> <p>has a note:
> <blockquote TYPE=CITE>
> <pre>NOTE: The two-port Fast Ethernet/ISL port adapters have been designed to provide inter-VLAN bridging and routing for Token Ring users. Native Fast Ethernet users are
> PA-FE-TX or PA-FE-FX adapters for higher performance.</pre>
> </blockquote>
>
> <p><br>Joe
> <p>Larry Rosenman wrote:
> <blockquote TYPE=CITE>A vendor of mine mentioned in passing that the PA-2FEISL-TX
> PA has an
> <br>issue with being driven above 60%.&nbsp; Has anyone got a reference
> on this
> <br>issue or some real-world experience?
> <p>Thanks!
> <p>LER
> <p>--
> <br>Larry Rosenman&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
> <a href="
http://www.lerctr.org/~ler">http://www.lerctr.org/~ler>
> <br>Phone: +1 972-414-9812 (voice) Internet:
ler@lerctr.org
> <br>US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749</blockquote>
> </html>
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT