Hello,
I'm trying to setup SGBP between two AS5300 servers - as0 and as1, but
experiencing some troubles... Here is config from as0:
username solstack password 7 14111D04
...
sgbp group solstack
sgbp member as1 x.x.x.x
sgbp source-ip y.y.y.y
and accordingly on as1 - group name and password are same,
member as0 y.y.y.y, source-ip x.x.x.x
Looks correct, but session state is IDLE and syslog contains such
messages:
Sep 28 10:32:24 as1 88: Sep 28 10:32:23: %SGBP-7-NORESP: Failed to respond
to as0 group solstack, may not have password
and the same from as0. Why? Does SGBP use AAA parameters when negotiation
with neighbors occurs? If yes - these parameters are:
aaa new-model
aaa authentication login default local group radius
aaa authentication ppp default if-needed group radius
and which are they should be?
IOS 12.1(4) IP Plus
Any comments or suggestions?
Thank you.
-- Vladimir Litovka <doka@kiev.sovam.com> . Phone/Fax: +380 44 4900111 . ICQ/none, talk/none ;)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT