Hi guys,
I'm using two Cisco 801 to connect to site through ISDN. The connection is used just for Netmeeting traffic (videoconferencing). How can I improve the Video quality through the routers configuration?
here the configuration of a router:
!
hostname ddsoff
!
username ddsoff pas 7 xxxxxxxx
isdn switch type basic-net3
!
inerface ethernet 0
ip address 10.0.0.4 255.0.0.0
no ip proxy-arp
no ip direct-broadcast
ip nat inside
!
!
interface bri0
no ip address
encapsulation ppp
dialer pool-member 1
dialer pool-member 2
!
interface dialer1
description ISP
ip address negotiated
encapsulation ppp
ip nat outside
dialer remote-name Cisco1
dialer idle-timeout 180
dialer fast-idle 3
dialer hold-queue 10
dialer string xxxxxxx
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxxxxx
ppp chap password xxxxxxx
!
interface dialer2
description RCN for videoconference
ip address negotiated
encapsulation ppp
ip nat outside
dialer remote-name ddsmad
dialer idle-timeout 180
dialer fast-idle 3
dialer hold-queue 10
dialer string xxxxxxx
dialer pool 2
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname ddsoff
ppp chap password xxxxxxx
!
ip route 0.0.0.0 0.0.0.0 dialer1
access-list 18 permit ip 10.0.0.0 0.255.255.255
dialer-list 1 protocol ip list 18
!
ip nat inside source list 18 interface dialer 1 overload
!
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:18 EDT