Re: [nsp] 7204VXR + ATM problems[was: 7206 HSSI interface resets]

From: Alex (alex@nac.net)
Date: Tue Oct 17 2000 - 01:23:34 EDT


We've had great luck in general stability in 12.0.10S, and
12.0.13S; especially, the nifty new snmp-server ifindex persistent command
(very cool!)

On Mon, 16 Oct 2000, Rick Irving wrote:

> Thank you.
>
> You may have just given me the clue....
>
>
> Testing.
>
>
> :)
>
> Rafi Sadowsky wrote:
> >
> > Hi
> >
> > Have you tried 12.0(7)S1 ?
> > (see full details below)
> >
> > Rafi
> >
> > On Mon, 16 Oct 2000, Rick Irving wrote:
> >
> > > I have a similar problem, again with the 7200 series.
> > > However, it seems to only exhibit itself on the 7200 VXR, NPE200,
> > > series... so far TAC seems at a loss.
> > >
> > > OC3 A3-MM cards, and 7204 VXR's don't seem to get along.
> > >
> > > UIt exhibits a wedged OC3 Interface, at random intervals...
> > >
> > > TAC can offer no safe avenue of code.
> > >
> > > Anyone have anything limping along ?
> > >
> > > Tried to date:
> > >
> > > 12.0.3T (As distributed)
> > > 12.0.7T
> > > 12.0.9S,
> > > 12.0.9 (As per TAC, doens't even support the controller)
> > > 12.0.13 (Same as above)
> > > 12.0.13S (Limping along, wedging every 12-13 hours, or so.
> > >
> > > This system is stripped down, and static routing. I have similar
> > > builds on 06's, and am not experiencing this type of issue.
> > >
> > > Suggestions ?
> > >
> > >
> > sh hard
> > ---
> > Cisco Internetwork Operating System Software
> > IOS (tm) 7200 Software (C7200-K3P-M), Version 12.0(7)S1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
> > Copyright (c) 1986-1999 by cisco Systems, Inc.
> > Compiled Tue 30-Nov-99 18:41 by rnapier
> > Image text-base: 0x60008900, data-base: 0x60D2C000
> >
> > ROM: System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> > BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(4)XE, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> >
> > XXXX uptime is 8 weeks, 5 days, 7 hours, 5 minutes
> > System returned to ROM by reload at 15:07:58 IST Wed Aug 16 2000
> > System restarted at 15:09:02 IST Wed Aug 16 2000
> > System image file is "slot0:c7200-k3p-mz.120-7.S1.bin"
> >
> > cisco 7204VXR (NPE200) processor with 122880K/8192K bytes of memory.
> > R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
> > 4 slot VXR midplane, Version 2.0
> >
> > Last reset from power-on
> > X.25 software, Version 3.0.0.
> > 1 FastEthernet/IEEE 802.3 interface(s)
> > 1 ATM network interface(s)
> > 125K bytes of non-volatile configuration memory.
> > 4096K bytes of packet SRAM memory.
> >
> > 16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> > 4096K bytes of Flash internal SIMM (Sector size 256K).
> > Configuration register is 0x102
> >
> > sh diag 1
> > ----------
> > Slot 1:
> > ATM WAN OC3 (MM) port adapter, 1 port
> > Port adapter is analyzed
> > Port adapter insertion time 8w5d ago
> > EEPROM contents at hardware discovery:
> > Hardware revision 2.0 Board revision A0
> > Serial number 15236704 Part number 73-2430-04
> > Test history 0x0 RMA number 00-00-00
> > EEPROM format version 1
> > EEPROM contents (hex):
> > 0x20: 01 59 02 00 00 E8 7E 60 49 09 7E 04 00 00 00 00
> > 0x30: 50 00 00 00 99 08 14 00 FF FF FF FF FF FF FF FF
>
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:19 EDT