You can find "memory-size iomem" command in the following link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/fp112rn/36_1
12_7.htm#xtocid126956
Judy Teng
Sr. NETWORK ENGINEER
US Cellular
Judy.teng@uscellular.com
-----Original Message-----
From: Strakadounas Kostas [mailto:strakad@forthnet.gr]
Sent: Friday, October 27, 2000 4:02 AM
To: cisco-nsp@puck.nether.net
Cc: esar@forthnet.gr; achatz@forthnet.gr
Subject: [nsp] Cisco 7200VXR memory configuration
Hello,
Does anyone know if we can change the memory partitions
for Processor an I/O on a cisco 7200 VXR (NPE300)?
Is there any IOS command similar to the "memory-size iomem " command
available for the 3640 series?
Write now the router seems to have plenty of I/O memory
but not enough processor memory.
cisco 7206VXR (NPE300) processor with 28672K/36864K bytes of memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
Cache
6 slot VXR midplane, Version 2.0
Router#sh mem
Head Total(b) Used(b) Free(b)
Lowest(b) Largest(b)
Processor 61147EA0 11239776 9676068 1563708 65448
119992
I/O 20000000 33554432 2546700 31007732 30965780
30903676
I/O-2 1C00000 4194304 18200 4176104
4142636 4176060
Thank you in advance,
Kostas Strakadounas
FORTHnet SA
Technical Department
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:20 EDT