From draft-katz-yeung-ospf-traffic-03.txt...
2.1 LSA type
This extension makes use of the Opaque LSA [4].
Three types of Opaque LSAs exist, each of which has different
flooding scope. This proposal uses only Type 10 LSAs, which have
area flooding scope.
Therefore, TE in an OSPF domain is limited to a single area.
chris
> -----Original Message-----
> From: Neil J. McRae [mailto:neil@COLT.NET]
> Sent: Monday, November 06, 2000 6:30 AM
> To: vac@dsqworld.com
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] MPLS Traffic engineering
>
>
> > Hi All,
> >
> > Thanks a lot once again for all the advice I have recieved. In the
> > mentioned versions of IOS, Can the OSPF support for Traffic
> enginnering be
> > extended to multiple OSPF areas, Because I was reading one
> of the Cisco
> > docs which was stating that the current OSPF support for TE
> is only for a
> > single area ie area 0.
>
> I believe this is true because of sumarisation issues between areas.
> [Although it would make my day if this wasn't the case].
>
> Regards,
> Neil.
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:20 EDT