Re: [nsp] Cisco 7200

From: Christian Kratzer (ck@toplink.net)
Date: Sat Nov 18 2000 - 11:27:17 EST

Next message: AINA ALAIN PATRICK: "Pwd recovery on grand junction fastswitch 2800"
Previous message: Vinod Anthony Joseph Cherunni: "[nsp] REG: OSPF routes."
In reply to: Deepak Jain: "[nsp] Cisco 7200"
Next in thread: Deepak Jain: "Re: [nsp] Cisco 7200"
Reply: Deepak Jain: "Re: [nsp] Cisco 7200"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

On Sat, 18 Nov 2000, Deepak Jain wrote:

>
> I am looking for the consensus opinion on the minimum processor/memory
> required on a 7200 to run a dual port T3 card and FE uplink at wirespeed
> w/ full BGP on all three? (Minimum implies that the router will actually
> respond to pings and telnet sessions without difficulty)

you will want to Max out memory to 256mb if running with more than
one full bgp feed.

Greetings
Christian Kratzer
Toplink

-- 
TopLink Internet Services GmbH			ck@171.2.195.in-addr.arpa
Christian Kratzer				http://www.toplink.net/
Phone: 	+49 7032 2701-0
Fax: 	+49 7032 2701-19	FreeBSD spoken here!

Next message: AINA ALAIN PATRICK: "Pwd recovery on grand junction fastswitch 2800"
Previous message: Vinod Anthony Joseph Cherunni: "[nsp] REG: OSPF routes."
In reply to: Deepak Jain: "[nsp] Cisco 7200"
Next in thread: Deepak Jain: "Re: [nsp] Cisco 7200"
Reply: Deepak Jain: "Re: [nsp] Cisco 7200"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:21 EDT