Oops... I thought that "conf t" is necessary before issuing these
commands... Thanks, I have found these commands in this very place.
How are their results reflected in config, or are these settings effective
until reload only?
--------------------------------------------------------
Basil (Vasily) Dolmatov CCIE #5347, CCNP-Security, CCDA
On Sat, 25 Nov 2000, Bert Kellerman wrote:
> Heya Basil,
>
>
> CMTS1#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (UBR7200-IST-M), Version 12.1(3)T, RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Wed 19-Jul-00 04:15 by ccai
> Image text-base: 0x60008960, data-base: 0x6137C000
>
> CMTS1#cable ?
> device Cable modem or host commands
> host Cable host (behind modem) commands
> modem Cable modem commands
>
> CMTS1#cabl modem ?
> A.B.C.D IP address of this modem
> H.H.H MAC address of this modem
>
> CMTS1#cabl modem 1111.1111.1111 ?
> access-group Access-group
> change-frequency Change DS frequency or US channel id
> max-hosts Modem max hosts number
> no Remove access-group
> qos Cable quality of service
>
> CMTS1#cabl modem 1111.1111.1111 access-group ?
> <1-199> IP access list (standard or extended)
> WORD Access-list name
>
>
> Everything looks okay to me :)
>
>
> Bert
>
> Basil Dolmatov wrote:
> >
> > Hello!
> >
> > I am trying to set up ACLs for hosts, connected via cable modems,
> > but command "cable host 1.1.1.1 access-group 101", described in
> > documentation is missed in command line parser (as well as command
> > "cable modem ... access-group" with similar meaning).
> >
> > IOS version is 12.1(3)T.
> >
> > Do I miss something important and underlying idea was changed
> > significantly?
> >
> > --------------------------------------------------------
> > Basil (Vasily) Dolmatov, CCIE #5347, CCNP-Security, CCDA
> > LightCom Corp. http://www.lightcom.ru
>
> --
> Bert
> (RTP on 11/29)
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:22 EDT