Re: [nsp] Traffic management for Colo centers

From: sthaug@nethelp.no
Date: Fri Dec 01 2000 - 21:27:59 EST


> > I know that Catalyst 2948G-L3 switches do rate-limiting per interface,
>
> I don't believe that this is true. You can configure it, but nothing
> actually happens. Note the "shaping active no" in the second example:

Which software are you running? According to

http://www.cisco.com/univercd/cc/td/doc/product/l3sw/4908g_l3/ios_12/10w518e/config/qos_cnfg.htm#xtocid246697

it does - but only with the very recently released 12.0(10)W5(18e):

"The Catalyst 2948G-L3 and 4908G-L3 switch routers support per-port
input rate limiting, output rate limiting, and traffic shaping based
on the token bucket algorithm beginning with Release 12.0(10)W5(18e)."

Steinar Haug, Nethelp consulting, sthaug@nethelp.no



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:22 EDT