FYI, the Catalyst 2948G-L3 can do rate-limiting,
Yuan Jiun, are we doing per port rate limiting for colo cust ?
-----Original Message-----
From: Bruce Robertson [mailto:bruce@greatbasin.net]
Sent: Saturday, December 02, 2000 8:55 AM
To: Imre Fitos
Cc: cisco-nsp@puck.nether.net
Subject: Re: [nsp] Traffic management for Colo centers
> I know that Catalyst 2948G-L3 switches do rate-limiting per interface,
I don't believe that this is true. You can configure it, but nothing
actually happens. Note the "shaping active no" in the second example:
rno-core1#sh traffic-shape f14
Interface Fa14
Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
- 400000 2500 10000 10000 25 1250 -
rno-core1#sh traffic-shape stat
Access Queue Packets Bytes Packets Bytes Shaping
I/F List Depth Delayed Delayed Active
Fa14 0 0 0 0 0 no
rno-core1#sh int f14
5 minute input rate 669000 bits/sec, 113 packets/sec
-- Bruce Robertson, President/CEO +1-775-348-7299 Great Basin Internet Services, Inc. fax: +1-775-348-9412 For PGP key: finger bruce@greatbasin.net
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:22 EDT