Re: SRP/DPT (was: Re: [nsp] GE switch)

From: Dave Cooper (dave.cooper@newtera.net)
Date: Thu Dec 07 2000 - 13:36:38 EST


See Cisco's intellectual property rights notice as posted on
the IETF page. Pertains to work done in draft-tsiang-srp-02.txt.
http://www.ietf.org/ietf/IPR/CISCO-SDR

-dave

----- Original Message -----
From: "Martin Cooper" <mjc@cooper.org.uk>
To: <cisco-nsp@puck.nether.net>
Cc: <cisco-nsp@puck.nether.net>
Sent: Thursday, December 07, 2000 6:00 AM
Subject: Re: SRP/DPT (was: Re: [nsp] GE switch)

> Neil J. McRae <neil@COLT.NET> writes:
>
> > Its confusing but I understood that DPT was Cisco but SRP was not.
> >
> > http://www.penta-com.com make DPT/SRP concentrators that are in
> > use at the new Netnod exchange in Sweden, which we're about to
> > connect into, they support STM4 to STM-64 interfaces.
>
> Ah - forgot about them. I think Cisco licenses the
> spec to them (although I could be wrong about that).
>
> M.
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:23 EDT