Re: [nsp] Routing Limit Exceeded

From: Jay Stewart (cosmo@olywa.net)
Date: Fri Dec 22 2000 - 13:18:35 EST

Next message: Bill Manning: "Re: [nsp] Routing Limit Exceeded"
Previous message: Andrew: "Re: [nsp] firmware upgrade on PIX 520"
In reply to: Andrew: "Re: [nsp] Routing Limit Exceeded"
Next in thread: Bill Manning: "Re: [nsp] Routing Limit Exceeded"
Reply: Bill Manning: "Re: [nsp] Routing Limit Exceeded"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Thanks for the pointers, but does anyone know the command to "reconfigure the limit".

Jay Stewart
Internet Network Engineer
Olympia Networking Services - "The Northwest's Premier ISP"
A wholly owned subsidiary of Advanced TelCom Group, Inc.

  ----- Original Message -----
  From: Andrew
  To: Jay Stewart ; cisco-nsp@puck.nether.net
  Sent: Friday, December 22, 2000 10:17 AM
  Subject: Re: [nsp] Routing Limit Exceeded

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121sup/121sems/emdinter.htm#xtocid2666214

  Error Message
  %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded - [chars], [int][inet]
  Explanation The number of routes in the named IP routing table has reached the configured limit. No further routes will be added to the table.
  Recommended Action Reduce the number of routes in the table, or reconfigure the limit.

At 03:57 PM 12/21/00 -0800, Jay Stewart wrote:

What's this mean? How do I increase the threshold?

    Jay Stewart
    Internet Network Engineer
    Olympia Networking Services - "The Northwest's Premier ISP"
    A wholly owned subsidiary of Advanced TelCom Group, Inc.

-=-=-=-=

    Dec 21 20:47:19: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
    Default-IP-Routing-Table, 24.234.0.0/17
    Dec 21 20:47:19: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
    Default-IP-Routing-Table, 24.244.11.0/24
    Dec 21 20:47:20: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
    Default-IP-Routing-Table, 24.71.144.0/20
    Dec 21 20:47:21: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
    Default-IP-Routing-Table, 10.0.1.0/24
    Dec 21 20:47:21: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
    Default-IP-Routing-Table, 10.0.0.0/24
    Dec 21 20:47:21: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
    Default-IP-Routing-Table, 61.12.112.0/21
    Dec 21 20:47:21: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
    Default-IP-Routing-Table, 62.179.32.0/19

Next message: Bill Manning: "Re: [nsp] Routing Limit Exceeded"
Previous message: Andrew: "Re: [nsp] firmware upgrade on PIX 520"
In reply to: Andrew: "Re: [nsp] Routing Limit Exceeded"
Next in thread: Bill Manning: "Re: [nsp] Routing Limit Exceeded"
Reply: Bill Manning: "Re: [nsp] Routing Limit Exceeded"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:24 EDT