Re: [nsp] 12.0(14)S/new uRPF code

From: Brent Sweeny (sweeny@indiana.edu)
Date: Fri Jan 05 2001 - 18:03:44 EST


On Fri, Jan 05, 2001 at 05:11:09PM -0500, Jared Mauch wrote:
> I've had no problems with it doing a
> "ip verify unicast source reachable-via any" on any of my
> equipment running 14S.. except for GSR Engine2 linecards which
> do not support it (yet).
> - Jared

Jared,
do you have any information that unicast RPF will *ever* be supported
on GSR Engine2 cards? all I hear from cisco is that it will never
be supported on them, that it's impossible. to know otherwise
would be very useful. thanks... Brent Sweeny, Indiana University
 
> On Fri, Jan 05, 2001 at 03:47:24PM -0600, Larry Rosenman wrote:
> >
> > Has anyone tried 12.0(14)S and the new RPF code that was
> > mentioned here around 12/19/2000?
> >
> > Any feedback?
> >
> > Thanks!
> >
> > --
> > Larry Rosenman http://www.lerctr.org/~ler
> > Phone: +1 972-414-9812 E-Mail: ler@lerctr.org
> > US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749
>
> --
> Jared Mauch | pgp key available via finger from jared@puck.nether.net
> clue++; | http://puck.nether.net/~jared/ My statements are only mine.
> END OF LINE | Manager of IP networks built within my own home



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:24 EDT