As I understand it, the new 124xx will be new chassis as well, aka half-dome
and quarter-dome. A CSC/SFC upgrade is only sufficient on the 12016.
chris
> -----Original Message-----
> From: Neil J. McRae [mailto:neil@COLT.NET]
> Sent: Thursday, January 11, 2001 7:41 AM
> To: ishizaki@dti.ad.jp
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] Cisco 12406
>
>
> > Cisco 12400 series(12406, 12410, 12416) seems to appear.
> >
> > http://www.cisco.com/univercd/cc/td/doc/pcat/0.htm
> >
> > I'm interested in Cisco 12406. But there is not spec
> information only this.
> > It's smaller than Cisco 12008?
> >
>
> I was told that on both the 12012 -> 12410 and the 12008 -> 12406
> in order to get the increased switch power you lose two slots, I found
> this hard to believe but it could make sense.
>
> So if you have a 12012 and what a 12410 you buy GSR12410/200-CSC=
> and GSR12410/200-SFC= and hey presto you get a 12410, personally I
> don't believe this but if it is true then I'm astounded.
>
> Regards,
> Neil.
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT