On Thu, 18 Jan 2001, Salvatore Privitera wrote:
> The problem is that whe have 2 LAN connectedto the ethernet 0/0 port, one
> public and one private using ip secondary address and we wan to do NAT on
> the SAME ethernet 0/0 interface!
What about using subinterfaces instead of secondary addresses? I'm not
positive this will work, but, I think it is your only option of getting
both an inbound and outbound interface to configure, which you need for
NAT.
-- Keith McCallion keith@mccallion.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT