Re: [nsp] VIP card CPU and Memory usage

From: Michael K. Smith (mike@wackypackets.com)
Date: Thu Jan 25 2001 - 20:04:59 EST


Hello:

You can use the command "sho controller vip <slot number>
tech-support". You can good information by replacing tech-support with
diagbus and align in the command above. As I understand it, the VIP is
supposed to have fairly high process usage. More important is whether or
not you have spurious interrupts, queue drops and the like.

Mike

On Thu, 25 Jan 2001, Hyunseog Ryu wrote:

> Hi, folks
>
> Is there any way to get current CPU and memory usage from VIP card?
> Either via SNMP query or command?
> If it shows high utilization, we need to consider upgrade.
> Thanks.
>
> Hyun
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Hyunseog Ryu / CCDA, MCSE
> Network Engineer/Applications Engineering
> Norlight Telecommunications, Inc.
> The Guardians of Data
> 275 North Corporate Drive
> Brookfield, WI 53045-5818
> Tel. +1.262.792.7965
> Fax. +1.262.792.7733
>
>

-------------------------------------------------------------------
Michael K. Smith mike@wackypackets.com

"I can no longer sit back and allow Communist infiltration,
Communist indoctrination, Communist subvsersion and the
International Communist Conspiracy to sap and impurify all
of our precious bodily fluids." -- Jack D. Ripper

PGP Key: 92F3 3C34 34A2 6900 8F9C 9A35 6D2A D0A6 4846 3BE0
-------------------------------------------------------------------



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:26 EDT