i know, but i have enable the debug mode on my router, the av attribute
send to tacaus is only
service, username, and command input, but not ip address
----- Original Message -----
From: "Roy" <garlic@garlic.com>
To: "Eric Chan" <bigeric@hknet.com>
Cc: <cisco-nsp@puck.nether.net>
Sent: Wednesday, January 31, 2001 3:49 PM
Subject: Re: [nsp] enquiry on tacas
>
> I know you can do it with radius. You use the IP address that is
requesting
> the authentication as part of the check items in determining to
authenticate
> and what parameters to send back
>
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:27 EDT