[nsp] Aggregate in MPLS "show mpls forwarding"

From: Edward S. Desouza (edward_desouza@yahoo.com)
Date: Fri Feb 02 2001 - 06:28:58 EST


I have looked at CISCO documentation and there seems
to be no detailed explanation for the command :

show mpls forwarding-table [ detail ]

consider the following output :

b>show mpls forwarding-table
Local Outgoing Prefix Bytes tag
Outgoing Next Hop
tag tag or VC or Tunnel Id switched
interface
16 Pop tag 100.1.1.23/32 0
Fa4/1/0 13.1.1.2
17 Pop tag [T] 100.1.1.30/32 0 Tu0
    point2point
18 Pop tag 11.1.1.0/24 0
Fa4/1/0 13.1.1.2
21 Untagged 200.1.1.0/24[V] 17155
Fa4/0/0 10.1.1.1
22 Aggregate 10.1.1.0/24[V] 0

QUESTIONS: What Does "aggregate stand for ?"

=====
Edward S. Desouza
23/24 Manali 5,
Evershine Nagar,
Malad (W),
Bombay 400064.
Tel:9122-8886362

__________________________________________________
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:27 EDT