On Mon, 5 Feb 2001, Eric Chan wrote:
> as i know, we can implement Qos on cat 6000 with PFC card, and i
> am going to prioritize traffic by cos on egress port. however, it
> is said that for packet going through MSFC, all cos will be set to
> 0(not configurable), and the egress port cos value-based drop
> threshold can not be applied. Then, how can i control the queuing
> for packet going through MSFC(as i think most of the traffic will
> go to MSFC and route)? thanks
Only the first packet of the flow will get to the MSFC.
Most packets are then MLS-switched and never get to the MSFC.
Quan,
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:27 EDT