No, more likely a configuration or rechability issue. Double check
that you've got the right IP in the config, and that there's nothing
interfering with UDP between the two. With tacacs, it's good idea
to have known backup telnet & enable passwords, this same kind of
thing can happen when you have a badly congested link or some kind of
network problem and life is better when you can get into the router.
George
> From: "Eric Chan" <bigeric@hknet.com>
> To: <cisco-nsp@puck.nether.net>
> Date: Tue, 6 Feb 2001 10:18:15 +0800
> Subject: [nsp] tacacs problem with 7206vxr
>
> i have used tacacs as my authentication server for my 7206vxr(NSE-100) =
> ios 12.1.(5)T.
> however, it didn't work. when i telnet to the router, it prompted me =
> with " password" rather than "username: password"
> i have another 7206vxr(NPE300) ios 12.1.4 with same configuration and it =
> works. is it the bug of 12.1(5)T ios ?
>
>
> eric
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:27 EDT