Re: [nsp] Cisco Connectivity with T1's

From: Siva Valliappan (svalliap@cisco.com)
Date: Tue Feb 06 2001 - 15:01:54 EST

Next message: RTS: "[nsp] Cisco Connectivity with T1's"
Previous message: George Robbins: "Re: [nsp] Cisco Connectivity with T1's"
In reply to: RTS: "[nsp] Cisco Connectivity with T1's"
Next in thread: RTS: "[nsp] Cisco Connectivity with T1's"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

yes. you can do this in one of 2 ways if there is no FR cloud inbetween.
one way is to configure both sides as FR end devices, and disable
keepalives. the other way is to configure one side as a FR DCE interface,
and set keepalives to 15.

cheers
.siva

>
> Can a T1 from provider to client run on frame encapsulation and still
> be "point to point".? Not a Frame-Relay T1.
>
>
> RTS
>

Next message: RTS: "[nsp] Cisco Connectivity with T1's"
Previous message: George Robbins: "Re: [nsp] Cisco Connectivity with T1's"
In reply to: RTS: "[nsp] Cisco Connectivity with T1's"
Next in thread: RTS: "[nsp] Cisco Connectivity with T1's"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:27 EDT