I have connected them together before with no problem. Just ensure you have
the "no neg auto" in, and then make sure you're using the same spec GBIC (SM
or MM) and the right fibre..
Cheers
Jon..
> -----Original Message-----
> From: Martin Picard [mailto:mpicard@sinc.ca]
> Sent: 15 February 2001 16:00
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] Back to back G/E between GSR and 7200
>
>
> Hi,
>
> I'm trying to make a back to back G/E connection
> come up between a GSR and a 7200....but I'm
> missing something.....it just won't....playing with
> negotiation auto does not seem to help....
>
> GSR to GSR no problem...
>
> any idea ?
>
> tx
> martin
>
>
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:29 EDT