Vinod,
the channelized PA does not support CAS signalling.
/pab
At 03:10 PM 2/15/01 +0530, Vinod Anthony Joseph Cherunni wrote:
>Dear All,
>
>One again here am I with some queries, On a Cisco 7513 router
>configured with an 8-port Channelized E1 card, I am able to
>define the "chanel-group" for timeslots, But when I require to
>configure the E1 slots for country specific parameters, I find
>that I am unable to use the "cas-custom" command. There seems
>to be no command in the IOS as such. The IOS being used is
>"rsp-isv-mz.121-6.bin". What could be the problem?
>
>Lastly on an AS-5300 / 5800 channels on an E1 controller are
>defined using the "cas-group" command, & the Cisco 7513/7206
>with an E1 controller use the "channel-group" command. Why is
>it so? & what is the difference?
>
>Kindly advice me.
>
>With warm regards,
>Vinod.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:29 EDT