Re: PA-MC-OC3

From: Mike Axelrod (maxelrod@digisle.net)
Date: Thu Feb 15 2001 - 16:16:43 EST


http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
limit/120s/120s14/12s_stm.htm

Mike Axelrod

----- Original Message -----
From: "George Robbins" <grr@shandakor.tharsis.com>
To: <cisco-nsp@puck.nether.net>; <JDesmarais@colt-telecom.com>
Sent: Thursday, February 15, 2001 10:45 AM
Subject: Re: PA-MC-OC3

> Any info about it on the cisco web site?
>
> It may still be in some pre-sales status, in which case it
> could take a long time to get one unless you have a special
> relationship with Cisco...
>
> George
>
> > From cisco-nsp-request@puck.nether.net Thu Feb 15 13:11:26 2001
> > Resent-Date: Thu, 15 Feb 2001 12:11:42 -0500
> > Received-Date: Thu, 15 Feb 2001 12:09:28 -0500
> > From: "Desmarais, Jonathan" <JDesmarais@colt-telecom.com>
> > To: cisco-nsp@puck.nether.net
> > Subject: PA-MC-OC3
> > Date: Thu, 15 Feb 2001 17:05:54 -0000
> > Resent-From: cisco-nsp@puck.nether.net
> > X-Mailing-List: <cisco-nsp@puck.nether.net> archive/latest/5350
> > X-Loop: cisco-nsp@puck.nether.net
> > Precedence: list
> > Resent-Sender: cisco-nsp-request@puck.nether.net
> >
> > Has anyone used one of these yet? I was just informed our Fractional-E3
trib
> > card supplier has a 4-7month lead time on deliver of new parts.
> > This MC_oc3/stm-1 looks to be the best answer.
> >
> > Cheers
> > Jon..
> >
> >
> > **********************************************************************
> > COLT Telecommunications
> > Registered in England No. 2452736
> > Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
> > Tel. 020 7390 3900
> >
> > This message is subject to and does not create or vary any contractual
> > relationship between COLT Telecommunications, its subsidiaries or
> > affiliates ("COLT") and you. Internet communications are not secure
> > and therefore COLT does not accept legal responsibility for the
> > contents of this message. Any view or opinions expressed are those of
> > the author. The message is intended for the addressee only and its
> > contents and any attached files are strictly confidential. If you have
> > received it in error, please telephone the number above. Thank you.
> >
> >
> > **********************************************************************
> >
> >



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:29 EDT