I want to make NAT with 168.233.15.136 to 139 global inside address but
NAT only use the 168.233.15.137, this is part of the configuration:
BTW I use a Cisco 3640
version 12.0
interface Ethernet0/0
ip nat inside
interface Serial1/0:7
ip nat outside
ip nat pool fuera 168.233.15.136 168.233.15.139 netmask 255.255.255.252
ip nat inside source list 1 pool fuera overload
access-list 1 permit 10.12.1.229
access-list 1 permit 10.12.0.0 0.0.255.255
This a chomp of the show ip nat translation:
Pro Inside global Inside local Outside local Outside
global
tcp 168.233.15.137:1035 10.12.1.229:2183 207.248.1.61:80
207.248.1.61:80
tcp 168.233.15.137:1257 10.12.8.144:1224 200.52.208.19:110
200.52.208.19:110
tcp 168.233.15.137:1228 10.12.1.12:1518 216.140.160.8:80
216.140.160.8:80
tcp 168.233.15.137:1073 10.12.5.223:1849 207.46.216.74:6667
207.46.216.74:6667
tcp 168.233.15.137:2476 10.12.1.43:2476 64.225.34.216:80
64.225.34.216:80
tcp 168.233.15.137:3041 10.12.1.43:3041 207.200.89.193:80
207.200.89.193:80
tcp 168.233.15.137:2082 10.12.8.134:1348 204.178.112.170:80
204.178.112.170:80
tcp 168.233.15.137:1260 10.12.1.12:1513 216.140.160.8:80
216.140.160.8:80
tcp 168.233.15.137:1417 10.12.5.195:1078 208.239.159.17:80
208.239.159.17:80
And never uses 168.233.15.136 -138 - 139
What is wrong?
Thanks in advance
RafaReta
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:30 EDT