[nsp] question re: 25xx series router via PPP dialup modem...

From: Rich Sena (ras@poppa.thick.net)
Date: Sun Feb 25 2001 - 23:00:09 EST

I know that this has to be doable... I have a client waiting on a T1 and
they want to get a 2501 up on a 56k dialup into their ISP's regualar
dialup pol - they have a static block...

this has to be doable - anyone ever done this...

I think I have it right but I can't get teh chat to trigger...

here is what I have:

chat-script rstusr "" "at&fs0=1e0&r2&d2&c1&b1&h1&m4&k1q0&w" "OK"
chat-script modem "" "atdt\T" TIMEOUT 60 CONNECT \c

interface Async1
 ip unnumbered Ethernet0
 ip access-group incoming in
 encapsulation ppp
 ip tcp header-compression passive
 no ip mroute-cache
 dialer in-band
 dialer map ip name dialup modem-script modem broadcast 5551212
 dialer-group 1
 async default routing
 async mode dedicated
 no cdp enable
 ppp pap sent-username xxxxxxx password 7 xxxxxxx

ip route Async1

dialer-list 1 protocol ip list 100

access-list 100 permit ip any any

line aux 0
 exec-timeout 0 0
 script reset rstusr
 modem InOut
 modem autoconfigure discovery
 transport input all
 stopbits 1
 speed 38400
 flowcontrol hardware

Will this work and if so - where am I dropping the ball...

Rich Sena - ras@thick.net
ThickNET Consulting
"On the way to understanding; you understand, and forget."

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:30 EDT