Re: [nsp] Was: Re: [nsp] Cisco 7206-VXR disaster recovery.

From: Barry Bruins (bbruins@cisco.com)
Date: Mon Feb 26 2001 - 10:21:46 EST


The command you wanted was 'format disk0:'.

As I mentioned, I don't know if you'll be able to get this to work if
the card wasn't formatted on a 7200.

Barry

At 08:18 PM 2/26/2001 +0530, Vinod Anthony Joseph Cherunni wrote:

>Hi .
>
>I am able to do a write to the flash (card / disk) from a Win2K laptop, But before all these problems happened, When the router was booting properly, I was unable to format the disks using "format slot0:", I got an error "disk not ready". But the "Show version" listed the flash disks properly. Now I am just trying to format the disk in a Linux Laptop for the FAT16 filesystem. Kindly advise me if anything else could be done.
>
>With warm regards,
>Vinod.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:30 EDT