Re: [nsp] [nsp] 7206 and console

From: Shawn Morris (shawn@smorris.com)
Date: Wed Feb 28 2001 - 11:57:01 EST

Next message: Cisco Systems Product Security Incident Response Team: "[nsp] Cisco Security Advisory: Cisco IOS Software Multiple SNMP Community String Vulnerabilities"
Previous message: Hank Nussbacher: "[nsp] WCCP questions"
In reply to: Davide Fazzone: "[nsp] [nsp] 7206 and console"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Are you set for software or hardware flow-control? I recently had
a defective I/O controller that had to use software flow-control.

On Wed, Feb 28, 2001 at 10:10:30AM +0100, Davide Fazzone wrote:
> Hello,
> I am not able to connet to a 7206 using its console port.
> The configuration of the console port is very simple:
> line con 0
> transport input none
>
> To connect I use the Tera Term Pro 2.3 The parameters are correct. I use
> the same console for a 3660 and others equipments and I am able to
> connect to these ones. I tried also with the hiperterminal without
> results.
>
> Any suggests?
> Thank you
> --
> Davide FAZZONE
>

-- 
Shawn Morris
Verio IP Engineering
v:312.621.7422
f:520.447.7082
shawn@smorris.com
smorris@verio.net

Next message: Cisco Systems Product Security Incident Response Team: "[nsp] Cisco Security Advisory: Cisco IOS Software Multiple SNMP Community String Vulnerabilities"
Previous message: Hank Nussbacher: "[nsp] WCCP questions"
In reply to: Davide Fazzone: "[nsp] [nsp] 7206 and console"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:30 EDT