You need to look at HSRP. That should take care of your problem.
On Wed, 7 Mar 2001, Vinod Anthony Joseph Cherunni wrote:
> Dear All,
>
> In a Cisco 7206-VXR with two Ethernet ports (One avaialable on the
> NPE-300, & another as a module), Is it not possible to build system level
> redundancy by physically connecting both the ports on a single switch. I
> am unable to define both ports to be part of the same IP subnet. Is there
> any workaround for this.
>
> Kindly enlighten me
>
> With warm regards,
> Vinod.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:31 EDT