Your best bet is to do FastEtherChannel if you have a L2 device connected to
the 7200 that supports it.
Bridging is much slower then FEChannel, so you chew up more CPU and thus
have less performance.
David
-----Original Message-----
From: Kurt Musselman [mailto:brewmaster1@home.com]
Sent: Thursday, March 08, 2001 4:12 AM
To: cisco-nsp@puck.nether.net
Subject: Re: [nsp] REG: Dual Ethernet Ports on Cisco 7206-VXR
Vinod:
My apologies for leading you down the wrong path.
It was late, and I somehow missed the
ETHERNET you so clearly specified in your subject.
Brian kindly notified of my error off-list.
For clarification:
PPP, HDLC are WAN encaps
Ethernet is LAN encap
AFAIK: You can't put PPP encap on an Ethernet.
I think that bridging might be the way to go.
Kurt
----- Original Message -----
From: Vinod Anthony Joseph Cherunni
To: sthaug@nethelp.no
Cc: brewmaster1@home.com ; cisco-nsp@puck.nether.net
Sent: Thursday, March 08, 2001 2:17 AM
Subject: Re: [nsp] REG: Dual Ethernet Ports on Cisco 7206-VXR
Hi,
I am little confused, Do you mean running PPP over the dual FE ports to
build redundancy, could you pls clarify. Could you pls give me a small
configuration example pls.
With warm regards,
Vinod.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:31 EDT