> From svalliap@cisco.com Fri Mar 9 01:18:22 2001
> From: Siva Valliappan <svalliap@cisco.com>
> Subject: Re: [nsp] ATM and 7500's
> To: grr@shandakor.tharsis.com (George Robbins)
> Date: Thu, 8 Mar 2001 22:17:50 -0800 (PST)
> Cc: Cisco-nsp@puck.nether.net, mherbst@cccoe.k12.ca.us
> In-Reply-To: <200103090051.TAA06726@shandakor.tharsis.com> from "George Robbins" at Mar 08, 2001 07:51:50 PM
>
> IRB is supported on the PA-A2 in 12.1()T land for the 7200. but we
> also support RBE for in this code and platform and PA.... ;)
> can you provide additional details on how it's broken?
I had a working ATM config on a 7505/PA-A3. I move this to a
7206/PA-A2, which requires a little mashing becuase the PA-A2
only allows VC numbers < 2048 vs. 4096 for the PA-A3. The
config has a hard-coded MAC address for the BVI. Everything
works fine, non-bridged P-P & Multipoint interfaces, but I
can't get any response from the bridged folks, they don't ARP.
Try various alterations and incantatations, including removing
the mac-address, no action.
Replace PA-A2 with PA-A3, reboot with the exact same config,
voila, everything works peachy-keen. 12.1(5)T4, tried both
is and a3js images. NPE-150/128M.
RBE is unfortunately useless here because it only works on a
p-p interface and Covad provisions DSL with each residential
customer on their own PVC (or at least the did for us).
George
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:31 EDT