We found the answer elsewhere...
Yes, the 7206 with NPE400 can support 8 DS3 ports. The 7206 can support
600 points total in slots 0, 1, 3, 5 and 600 points total in slots 2, 4,
6. Since, the 2T3 cards require 180 points each card, slots 1, 3, 5 could
have three of the 2T3 cards and slot 2 could have the fourth 2T3
card. This would leave enough "points" to support one GE in slot 4 or 2 FE
in slot 4. The FE on the IO controller could not be used in this
configuration. I hope this answers your question. Also, please see URL
that details the bandwidth in terms of points:
http://www.cisco.com/univercd/cc/td/doc/product/core/7206/port_adp/3471pac6.htm
At 03:05 PM 3/12/2001 -0500, you wrote:
>I think It changed with the VXR chassies or NPE-300. In the past it
>appeared to be a fixed number, recent IOS appears to work a little
>harder and will tell you if one PCI bus or the other in your VXR is
>over-commited.
>
> George
>
>
> > From cisco-nsp-request@puck.nether.net Mon Mar 12 14:57:48 2001
> > Date: Mon, 12 Mar 2001 14:53:51 -0500
> > X-From_: tony@pardini.org Mon Mar 12 14:53:51 2001
> > Received-Date: Mon, 12 Mar 2001 14:53:50 -0500
> > X-Sender: tony@muerte.emphasys.net (Unverified)
> > Old-Date: Mon, 12 Mar 2001 13:49:23 -0600
> > To: cisco-nsp@puck.nether.net
> > From: Anthony Pardini <tony@pardini.org>
> > Old-X-Envelope-To: cisco-nsp
> > Resent-From: jared@puck.nether.net
> > Resent-Date: Mon, 12 Mar 2001 14:54:06 -0500
> > Resent-To: cisco-nsp@puck.nether.net
> > Subject: [nsp] 7200 VXR & NPE400
> > X-Mailing-List: <cisco-nsp@puck.nether.net> archive/latest/5654
> > X-Loop: cisco-nsp@puck.nether.net
> > Precedence: list
> > Resent-Sender: cisco-nsp-request@puck.nether.net
> >
> >
> > Did the MAX number of high speed interfaces change w/ the NPE400 ?
> >
> > tony
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:32 EDT