this will be the radius profile that you will need on the Cisco Access
Registrar
[ //localhost/Radius/Profiles/p-ssg-iptv/Attributes ]
Cisco-SSG-Service-Info = R0.0.0.0;0.0.0.0 (default-network)
Cisco-SSG-Service-Info = D203.127.225.10 (DNS)
Cisco-SSG-Service-Info = MC (concurrent)
Cisco-SSG-Service-Info = TP (pass-through)
Service-Type = Outbound
make sure that you enable the ip multicast-routing in global configuration
and ip pim dense-mode(it depends on multicast protocol that will use)
on interface level
of the CPE and 6400
verify if you can see the multicast address that the IP/TV uses
(you can modify the multicast address in the content server of your IP/TV)
on your CPE.
rgds,
Roy Reyes
---- "Angelo De Guzman"
<a.deguzman@wesolv.com.ph> wrote:
> This is my set-up
>
> LAN(IP/TV server)--->6400(SSG)--->BPX--->DSLAM--->cisco 827-->PC(w/
> iptv viewer)
>
> I can see the listings of the scheduled programs and on-demand videos
> on my
> PC. My problem is that I cannot run them. I'm running IP/TV as one
> of the
> services in my SSD. Already enabled SSG multicast. Is there any specific
> attribute that I should define on my radius server. I'm using Cisco
> Access
> Registrar 1.6R1.
>
> Any input appreciated!
>
> Angelo
>
>
___________________________________________________________________
To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
all in one place - sign up today at http://www.zdnetonebox.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:32 EDT