RE: [nsp] Bandwidth Limiting of subnets within ATM PVC

From: Neil J. McRae (neil@COLT.NET)
Date: Wed Mar 28 2001 - 09:50:36 EST


Look at CAR.

Neil.

> -----Original Message-----
> From: Amjad Al-Ashqar [mailto:amjad@atheer.net.sa]
> Sent: 28 March 2001 15:36
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] Bandwidth Limiting of subnets within ATM PVC
>
>
> I have an ATM link with a PVC defined inside it as an uplink/downlink
> (default gateway)
> of a group of subnetworks who are connected through different ATM PVCs.
> The question is, if the UPlink PVC is about 2Mbps bandwidth and I have
> multiple
> subnetworks who want to access this link but with doing bandwidth
> limitation
> for each
> one of them especially the downlink (inbound) bandwidth, in another world
> can I provide
> CIR rate for each one of them especially in the inbound traffic.
> The subnetworks are distinguished by IP subnets and all of them share this
> link for
> inbound and outbound??
>
> Regards, Amjad
>
>
> ----- Original Message -----
> From: "Young, Jason" <Jason.Young@anheuser-busch.com>
> To: "'eric chan'" <bigeric123@hotmail.com>; <cisco-nsp@puck.nether.net>
> Sent: Wednesday, March 28, 2001 5:58 AM
> Subject: RE: [nsp] tacas bugs ??
>
>
> >
> > AAA authorization is not applied to the console port. I ran into this
> while
> > configuring TACACS+ on all of our routers in my previous life. I forget
> exactly
> > what Cisco's rationalization for this is (something to do with
> functionality in
> > case the TACACS+ server fails), but it's documented in several places.
> >
> >
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/
113ed_cr/s
ecur
> _c/scprt1/scauthor.htm#xtocid225285
>
> Jason Young
> CNS - Network Design, Anheuser-Busch
> (314)577-4597
>
>
> > -----Original Message-----
> > From: eric chan [mailto:bigeric123@hotmail.com]
> > Sent: Wednesday, March 28, 2001 12:21 AM
> > To: cisco-nsp@puck.nether.net
> > Subject: [nsp] tacas bugs ??
> >
> >
> > i have setup tacas with cisco router for access control
> >
> > aaa authentication login default group tacas line
> > aaa authentication enable default group tacas enable
> > aaa authorization command 15 default group tacas none.
> >
> > it works very well in telnet session. however, when i access
> > via console,
> > the authorization part failed, all user can type any
> > command in enable
> > mode. do you have any idea ?? is enable mode through console
> > not useing
> > level 15 ? thanks
> >
> >
> >
> > eric
> > ______________________________________________________________
> > ___________
> > Get Your Private, Free E-mail from MSN Hotmail at
> > http://www.hotmail.com.
> >
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:33 EDT