dear all,
i would like to establish a fastethernet channel between an cat6509
and cat5500, however, it failed to establish. i know that for
fastethernet channel, all setting of the ports should be the same and i
have checked it too.
all four ports are trunk port with isl, with same allowed vlan and native
vlan.
i have set port channel desirable on both switch, but the channel failed to
establish. is there any hint on this ?
before i setup the channel, there is only one difference between the two
links, by Spanning tree, one of the trunk link is all forwarding, and the
second link is all blocking
thanks
eric
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:34 EDT