Suggestion/help needed...
Well here is go.
When I was swapping to a new 1601 router accidentally.
I only activates timeslot 24 ONLY.
needless to say, I had full T1 on the other end, it did not work.
Then I thought I can adjust this end to only timeslot 24.
interesting enough protocol and line are up.
Eariler line was up but not protocol.
There is a problem.
there is a static route statement pointed to s1/0/6:0
ip route x.x.x.x.0 255.255.255.224 s1/0/6:0
and protocol up, never went down however,
when type
show ip route x.x.x.x.1, it shows that belongs to ethernet and
prefering to class B network.
I thought as long as protocol is up, even if it can not pass data,
ie looped, it will still prefer s1/0/6:0.
Could anyone explain for me why that is not the case?
I believe the reason this 64K dataline does not work is because teleco
must changes its configuration...
Now this brings me another question, how I would know the line is
provisioned correctly? I see up/up I can not pass data and ...
TIA,
Tatsuya
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Tatsuya Kawasaki
Allegiance Telecom
Unlock the Power of the Internet
http://www.kivex.com
Phone 301.215.6777 Fax 301.215.5991
Affiliation given for identification not representation
/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:34 EDT